I've listed notes and instructions for setting up a protools sound project. In the brief we've been tasked to create 2 sound samples, one with just the soundscape and the other with the narration attached.
The sound samples must have a duration “last up to” 30
seconds to a minute in length.
UBIQUITOUS
Mixing suit Dongle
free
W103 G20G22 G23
In order to open protools we are in need to “use a iLok dongle”
To reduce volume I am to look into
the equaliser.
I can decrease the level of volume with Compressor,.
The gate can get rid of background noise.
EQ changes volume frequencies.
Create 2 mono tracks encase you recorded in stereo by
mistake
In a frequency
Partials
Harmonics are the higher lines
Modulation
SEND TWO ONE WITH THE SOUND AND THE OTHER WITH THE NARATION
Press the enter button one the keyboard, it has a symbol
resembling the letter K turned on its side
In order to record I am to press the record button and the play button afterwards.
To reduce volume I am to look into
the equaliser.
I can decrease the level of volume with Compressor.
The gate can get rid of background noise.
EQ changes volume frequencies.
Create 2 mono tracks encase you recorded in stereo by
mistake
Press the enter button one the keyboard, it has a symbol
resembling the letter K turned on its side.
Sound Pro tools
Export
Minus 10 D B
Deserbells are difernt levels
Headphones can deceives what the actaull level the sound is
How to fix this is to agree on how loud the volume in
protools
Create new track
Create stereo,
Mater fader
Going into mixer
Use compressor to automatic lower volume level
Select how long you want to export
Set markers at top of track
Link timeline
Don’t click Export, instead click Bounce to
Command S
Steroe
Inter
48 kHz
Convert After Bounce
Save where In your name, sound designHW_joelfoster_all
Save twice
HW_joelfoster_SDOnly
No comments:
Post a Comment